Plus M-5 Manuel d'utilisateur

1Copyboard M-5User’s Manual (CD-ROM Edition)Thank you for your purchase of the PLUS Copyboard.Please read this User’s Manual (CD-ROM Edition) carefull

10Installing on a WallParts included in the copyboard package:Wall mount bar (1 pc), upper brackets (2 pcs),Marker tray (1 pc, with 2 side covers) and

111 21 2 3[Reference] Method of installation for different wall materialsSelect the type of installation best suited for the wall material.If the

12(4) Mount the 2 upper and 2 lower brackets includedwith the copyboard using M4 x 12 screws.• Both of the left and right upper brackets are installed

13Installing on a StandThe optional stand kit for both vertical and horizontal installation (Model M-5-T, order code 44-562) is required toinstall th

143123M4⳯12 screwsLower bracketUpper bracket (Left)Upper bracket (Rightt)M4⳯12 screwsM4⳯12 screwsFixing knobsHexagon cap nuts(4) Mount the upper and l

15Changing the image storing setting to “vertical”Assembling the standMounting the brackets on the copyboardMounting the copyboard onto the standMount

16(3) Mount the upper and lower bracketsusing M4 x 12 screws.• The left and right upper brackets are different.Be sure to mount them on the proper sid

173123Marker trayPartition hangerM4 screwsM4 screwsMounting the copyboard on the partitionMounting the marker tray on the copyboardMounting the partit

18M4 x 8 flat head screws Hanger bracketHookM4 x 6 screwsPartition panelHooks(3) Mount the hanger brackets to the screw holes at themiddle of the part

19Operation Instruc-tionsThis manual contains information pertaining to thecopyboard.For instructions on the included software, please referto the sof

2Trademarks• Microsoft and Windows are registered trademarks or trademarks in the United States and other countries of the MicrosoftCorporation.• IBM

20Names of Main Unit Controls and ConnectorsMEMORYPOWERCLEARPOSITIONFEED /STOPMEMORYPOWERCLEARPOSITIONFEED /STOP햻햺햸햵햴햶햳햲햷햹The connectors are locat

21Handling CF Memory Cards•We recommend backing up data stored in the built-in memory or on CF memory cards onto other recording mediaperiodically to

22Operating the Copyboard123MEMORYPOWERCLEARPOSITIONFEED /STOPPOWERCLEARPOSITIONThese operations are required when storing the drawings on the copyb

23MEMOPOWERFEED /STOPMEMORYPOWERCLEARPOSITIONFEED /STOPSaving the Image on the SheetImages drawn on the sheet can be stored either in the built-in

24MEMORYWERFEED /STOPPOWERFEED /STOPMEMORYPOWERFEED /STOPMEMORYPOWERCLEARFEED /STOP䡵 Saving sheet images on a CF memory cardInsert the CF memo

25POWERFEED /STOPCLEARPOSITIONPOWERCLEARPOSITIONClearing the built-in MemoryUse this procedure to clear all the image files in the built-in memory.N

26Storing Image Files on a ComputerThe following describes the procedure for storing image files stored in the built-in memory or on a CF memory cardo

27MEMORYPOWERCLEARPOSITIONFEED /STOPTo store image files from a CF memory card, insert theCF memory card into the copyboard’s card slot.There is no

28Deleting filesIf the built-in memory or CF memory card gets full, some im-age files must be deleted.(The built-in memory can be cleared completely u

29“Remove hardware” icon (example)Note:• Do not remove the CF memory card while files are be-ing stored (while the MEMORY indicator is blinkingslowly)

3Table of ContentsIMPORTANT SAFETY INFORMATION ------------------------------------------------------------ 4Packaged Contents -----------------------

30Using a PC Card Adapter or Memory Card Reader/Writer (USB type)Prepare the optional or commercially available memory card reader/writer or PC card a

31䡵 Using a memory card reader/writer (USB type)Insert the CF memory card into the CF memory cardslot on the memory card reader/writer.Connect the mem

32TroubleshootingCheck the following before asking for repairs.SymptomPower does not turn on when POWER buttonpressedWriting on the sheet does not era

33Specifications*1CF memory cards sold separately.* Please note that for quality improvement purposes, specifications and design are subject to change

34Quick CalibrationThe procedure described below is used to adjust (calibrate) for optimum scanning condition of the sheet surface.Perform this quick

35Software GuideThis guide covers the installation and starting procedurefor the software contained on the CD-ROM supplied withthe Copyboard.See the s

36Before Using the SoftwareSoftware Contents and OverviewThe supplied CD-ROM contains the software and manuals described below. See the Help informati

37Windows 98SE Personal Computer and USB ConnectionsDriver Setup (Windows 98SE)Note:•Do not connect the Copyboard with the personal computer until Ste

38Open the Device Manager screen and check theinstallation.햲 Right click [My Computer], then click on [Properties] ofthe menu to open the [System Prop

39Windows Me / 2000/ XP Personal Computer and USB ConnectionsSetup of the driver is not required when USB connections are made between Windows Me / 20

4IMPORTANT SAFETY INFORMATION WARNINGThe unit’s rear panel should never be opened by anyone other than a qualified serviceperson. There aremany high v

40Disconnecting of the CopyboardPlease perform the following procedure when disconnecting the Copyboard during Windows operation.Note: The removal ico

41M-5 Setup UtilityThe M-5’s operating configuration can be changed using the M-5 setup utility.Contents:Image file format, image file time stamp, aut

42Electronic User's ManualThe User's Manual stored on the CD-ROM is in the PDF format. [Acrobat Reader] should first be installed if notalre

43PLUS Image ViewerPlease install the PLUS Image Viewer to display on a personal computer, print or file the image data that is stored inthe built-in

44Deleting the SoftwareIf the installed software is no longer needed, please perform the uninstall operation.Select [Start] → [Setting]→ [ControlPan

45200413-2127-04B

5Installation• When the copyboard is mounted on a stand, be sure to lock the casters.• When mounting on a wall, be sure to check first that the wall s

6Packaged ContentsThe contents included in the package are described below. Make sure that all items are included before starting.Copyboard (main unit

7Names of PartsFront and topBack and bottomThis diagram shows the copyboard set with the frontside facing down. 1. Copyboard 2. Sheet 3. Control pa

8Installation andAssemblyInstructionsTo the CustomerSpecialized techniques are required in the wall mounting of theCopyboard. Please do not attempt an

9Read This Before Installing WARNINGS• Be sure to install and assemble the copyboard as instructed in this manual. Improper installation or assemblyc