Plus M-10 Manuel d'utilisateur télécharger pdf (Page 16)

E-16

COLOR

MEMORY

POWER

Press the COLOR button and select Color or Black & White.

• At first, when the power is switched on, black & white is selected.

Press the MEMORY button to store

• The reading operation is performed for a one-sheet portion (while the sheet is scrolled) and memory storage starts

after the scrolling completes.

The (5 second) flashing “CF” display indicates that the memory card has not been inserted. Please

insert the memory card and then press the MEMORY button.

The (5 second) flashing “FL” display indicates that the memory card is full. Please see Page E-18.

Note

• For some memory cards, some time may be required for recognition.

• Do not press the FEED/STOP button during the reading operation. Doing so will interrupt the memory storage and only the image data

up to that point will be stored.

To change the sheet surface, press the FEED/STOP button after stopping the scrolling.

•A press of the COPY button during memory storage starts the printing after storage is completed.

• In the wide type (M-10W) copyboard, the image will be reduced to about 71% in the horizontal direction.

• Saved files are always dated January 1, 2003.

• If there is not enough space, the memory card is judged to be full from the start. If the memory card runs out of space while a file is

being saved, “FL” is displayed at that point. Delete data, set the sheet surface back to the original status, then press the “Memory”

button again.

Removal of the Memory Card

Check that the flashing of the display window has changed to a steady

light and then pull out the memory card.

CAUTION

• Do not remove the memory card during memory storage (while the display

window indication is flashing). Data will be lost if you do so.

When the copyboard is not going to be used, press the POWER button and switch

off the power.

Note

• In the absence of button operations, the fluorescent lamp will be switched off after 30 minutes. Another press of the MEMORY button

will start memory storage after the fluorescent lamp is switched on.

COLOR lamp

Lit ......... Memory storage will be in color.

Unlit ...... Memory storage will be in black & white.

Sequential flashing during memory storage

Display window

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 24 25

Pas de commentaire

Plus M-10 Manuel d'utilisateur Page 16